PREPARATION OF
POWDER ROUGE
OBJECTIVES:
1.     
 To formulate dry powder rouge.
2.     
 To study the factor affecting color
shading in powder rouge.
3.     
 To evaluate the effect of storage
condition on the final product.
INTRODUCTION:
   
   Rouges were used to colour the lips in early days which becoming
more popular in the use of stick rouge or lipstick. However, nowadays rouge is
a cosmetics used to apply color to the cheeks to create a more healthy
appearance on the skin. Powder rouges did not differ from face powder apart
from being more highly coloured and opaque. This preparation requires higher
concentrations of dyes and pigments along with opacifiers like zinc oxide and
titanium dioxide. Rouge is used to simulate a natural glow and must look
subtle. Modern rouge preparations come in the forms of liquid, cream and dry
solids forms. 
Powder rouge
has the advantage of being more readily carried about, but the cream is much
more permanent in result and, if artistically used, defies detection. Powder
rouges are usually rubbed on the skin with a rouge cloth or a bit of soft
flannel. By applying a neutral shade of rouge like beige for example, directly
underneath the cheek bone will soften the cheek bone make it less obvious. If
applied before the face powder, the result is heightened.
Although cream
rouge looks very similar to a paste rouge and shows little distinction between
the cream rouges are emulsions contain water. They were made in either
oil-in-water emulsion or water-in-oil emulsion. As they contained water, cream
rouges were susceptible to evaporation as well as bacterial and fungal
degradation. However, cream or gel rouge has better staying power, while powder
rouge comes in larger variety of shades. Cream rouges are great for women who
have drier skin since the humectants provide a hydrating benefit.
Spatula, weighing boat, mortar and pestle
INGREDIENTS:
Kaolin, Talc, Magnesium stereate, Zinc oxide,
Rice starch, Magnesium carbonate, Colorant (), Titanium dioxide as much as is
sufficient
PROCEDURE:
1)     
60g of the
basic powder formulation without colouring agent (PO) was prepared.
2)     
Another 60g of
a powder rouge containing 4% of an insoluble red colouring agent (P4) was
prepared.
3)     
4 other powder
rouge preparations were prepared by diluting the 4% powder rouge accordingly to
obtain various shades of colour.
4)     
The suggested
concentration of colouring agent was 0.5 - 4%
FORMULATIONS:
Basic powder formulation 
 | 
  
60g of PO (0%)  
 | 
  
60g of P4 (4%) 
 | 
 |
Kaolin 
 | 
  
16% 
 | 
  
9.6g 
 | 
  
9.6g 
 | 
 
Talc 
 | 
  
48% 
 | 
  
28.8g 
 | 
  
28.8g 
 | 
 
Magnesium stearate 
 | 
  
6% 
 | 
  
3.6g 
 | 
  
3.6g 
 | 
 
Zinc Oxide 
 | 
  
5% 
 | 
  
3.0g 
 | 
  
3.0g 
 | 
 
Rice starch 
 | 
  
10% 
 | 
  
6.0g 
 | 
  
6.0g 
 | 
 
Magnesium carbonate 
 | 
  
5% 
 | 
  
3.0g 
 | 
  
3.0g 
 | 
 
Colorant (Colorona magenta) 
 | 
  
4% 
 | 
  
- 
 | 
  
2.4g 
 | 
 
Titanium dioxide q.s ad 
 | 
  
100% 
 | 
  
6g 
 | 
  
3.6g 
 | 
 
Code 
 | 
  
Colorant (%) 
 | 
  
Amount of P4 
 | 
  
Amount of PO 
 | 
  
Total amount of rouge (g) 
 | 
 
P1 
 | 
  
0.5 
 | 
  
2.5 
 | 
  
17.5 
 | 
  
20 
 | 
 
P2 
 | 
  
1 
 | 
  
5 
 | 
  
15 
 | 
  
20 
 | 
 
P3 
 | 
  
2 
 | 
  
10 
 | 
  
10 
 | 
  
20 
 | 
 
P4 
 | 
  
3 
 | 
  
15 
 | 
  
5 
 | 
  
20 
 | 
 
P5 
 | 
  
4 
 | 
  
20 
 | 
  
- 
 | 
  
20 
 | 
 
Total (g) 
 | 
  
52.5  
 | 
  
47.5  
 | 
  
STABILITY TESTING:
1)     
All the
remaining products were placed in one warm and sunny position.
2)     
After 4 weeks,
the products were evaluated.
Stability
Testing
The products are placed in warm and sunny position. Then, the
products are evaluated after 4 weeks.
1. Powder rouge when exposed to light
Code 
 | 
  
Change in colour 
 | 
  
Change Separation 
 | 
  
Flow properties 
 | 
 
P1 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P2 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P3 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P4 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P5 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
2. Powder rouge in the dark
Code 
 | 
  
Change in colour 
 | 
  
Change Separation 
 | 
  
Flow properties 
 | 
 
P1 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P2 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P3 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P4 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
P5 
 | 
  
No 
 | 
  
No 
 | 
  
Good 
 | 
 
3. Powder rouge when test on cheek
Code 
 | 
  
Duration of Application 
 | 
  
Result 
 | 
 
P1 
 | 
  
6 hours 
 | 
  
No irritation, smooth 
 | 
 
P2 
 | 
  
6 hours 
 | 
  
No irritation, smooth 
 | 
 
P3 
 | 
  
6 hours 
 | 
  
No irritation, smooth 
 | 
 
P4 
 | 
  
6 hours 
 | 
  
No irritation, smooth 
 | 
 
P5 
 | 
  
6 hours 
 | 
  
No irritation, smooth 
 | 
 
DISCUSSION:
In preparation of powder rouge, some important ingredients are
needed such as kaolin, talc, and rice starch and magnesium stearate. Kaolin
acts as an emollient and drying agent in the powder rouge. Kaolin can also be applied directly to the skin, to dry and soften the skin. Kaolin is a popular ingredient
in powder rouge due to its clay texture which provides skincare benefits and
also acts as an excellent base. Talc, also known talcum powder, is used
primarily as a basis for powders. It is widely used as an active agent and
auxiliary agent, with a disinfectant, astringent, anti-itching or cooling
effect. Talc is also suitable as a lubricant in powder rouge. Talcum powder is
able to absorb moisture, oils, mask odor, and produce an astringent effect with
human skin, and thus it is commonly used in powder preparation for external
use. Rice starch is used as an excipient, disintegrant or as binder in pharmaceutical products.
Starch, a natural polymer, is routinely used
as filler, binder and disintegrant in various solid dosage forms. Unique characteristics of rice starch include hypoallergenicity, digestibility, consumer acceptance,
bland flavor, small granules, white color, increased freeze– thaw stability of
pastes, greater acid resistance, and a wide range of amylose:amylopectin
ratios, causing it to have higher demand in pharmaceutical and cosmetics
products compared to other excipients.  Magnesium stearate exists as a salt form and it
provides lubricating effect for powder products in industry. Magnesium Stearate
is used as a dusting addictive and as an anti-caking, binding, thickening and
gelling agent. It provides good slip and adhesion to mineral makeup and powder
rouge.
            Basic powder formulation without
coloring agent is firstly prepared and mixed with another powder rouge
containing 4% of insoluble red coloring agent. The powders are mixed with
different proportion to get various shades of colors. The higher the concentration
of colorant in the formulation, the darker the color of powder observed.  
            Powder rouge is usually compared
with cream rouge. Each rouge forms have their own purpose and suitability that
can be used in different occasions. Powder rouge
works with all skin types, but best suited on oily skin. The
densely-packed powder is easier to apply and stay longer on the skin compared
to the cream. Powder rouge provides a matte, polished look. Cream blush, on the
other hand, is greatly suitable for aging or dry skin. The cream formulas
provide hydrating; moisturizing and give a dewy, glowy look on the skin when
applied. They’re also really lightweight, which tends to give a more natural
flush. However, cream rouge stays for a shorter period compared to powder form.
On the other hand, cream and powder rouge can also be applied together, to
ensure a natural color on the skin and a long lasting effect. Formulation of powder rouge is mainly made up of powder form, such as kaolin, talc, magnesium stearate and zinc oxide. On the other hand, cream rouge formulation consists of oil and wax, such as cocoa butter, beewax, wool fat and liquid paraffin.
      For the stability test, the powder rouges are
stored in different condition; exposed to sunlight and in dark. Few criteria
are observed, include the color separation, color change and also the flow
properties, changes observed before and after a certain period. After one
month, any changes are measured. However as stated in the result, there is no
changes in color, flow properties of the powder and no color separation occurs.
The presence of light does not really affects the storage and the properties of
the powder rouge. The product is relatively stable and there is no change or
separation in color due to the fact that there is absence of liquid
formulation. In addition, the formulation also contains titanium dioxide which
absorbs, reflects, or scatters light (including ultraviolet radiation in
light). This shows why the product is protected from deterioration. Besides,
magnesium stearate which is a good glidant is also incorporated in the
formulation. That is why the powder still has good flow properties even after a
month of storage. Glidant is substance that can improve the flow ability of powder. 
However, it tested for one month thus precautionary steps are still needed to
be done like avoid exposing it to direct sunlight to make sure that the product
will not be undergo any chemical or physical changes throughout the usage
before the expiring date.
CONCLUSION:
In conclusion, each
ingredient play important role in the formulation of powder rouge. In this
experiment, different proportion of colorants used to see if there is any
different in physical and chemical changes. 
1.       John Toedt, Darrell Koza, Kathleen
Van Cleef-Toedt. 2005. ‘Chemical composition of everyday products’. Greenwood
Publishing Group. Page 25-26
2.      Asian Journal of Pharmaceutics. Formulation and evaluation of powder
rouge



At what times of the day should we take the fat burner capsules? ultimate nutrition prostar 100 whey protein review
ReplyDelete